Replacing a typical leaky faucet can be as easy, depending of course on what's causing the flow. Ordinarily, but the seals inside of the unit have worn from use and no more seal nicely enough. This problem is a simple fix so long as you have the right tools ' an Allen wrench, a channel lock or vice grip pliers, and a pair of needle nose pliers. A new pair of seals, screws, and a metallic ball can be found in any local hardware store.
First and foremost it's very important to shut off both cold and hot water lines before removing the faucet. Begin by removing the grip of this unit and exposing a metal housing indoors. To do this, lift the handle all the way up to see a screw that requires the Allen wrench. Loosen and remove the twist as well as the handle. The metal housing can be removed too but use the station lock/vice grip pliers to twist the base of the housing to loosen it.
After that's been removed you'll be able to access the mechanism that works the ball and utilizes the seals. Pull the mechanism out by the stem and you will discover your seals. Typically they are black rubber/plastic and are rather inexpensive (roughly 5 dollars) in many hardware stores. These seals are what must be substituted, and the springs add pressure.
Use the needle nosed pliers and pull straight up on the seals to remove them. Replace them the exact same manner using the pliers to shove into the slot. If you bought a brand new ball which is almost always a fantastic idea then that may be replaced with the older one. Be sure to put everything back together that each hole lines up properly, this is important. Lubricating the seals and ball with Vaseline is a good way to make things work smoother.

Top Tech Mechanical is a Commercial Restaurant Kitchen Repair Company in Atlanta serving all of the Metro Atlanta area. If you re in need of Restaurant Equipment Repair including refrigerators, freezers, stoves, ovens and more then call us today.